T&H Two components meter/mix dispenser

Model:TH-2004AB    Order No:THAB2

Features:

• Have a big capacity cartridge,make the time of importing materials minimum, and reduce waste.

• Adopted with the TH-700J pneumatic double-liquid valve can interrupt the flow quickly without dripping.

• Static mixer is used which can mix liquid evenly. It can be cleaned conveniently.

• The auto-cycling function can reduce labor intensity and increase the production.

• Digital circuit timing controlling technology was used, and the dispensing time can be set throught he digital dial.

• The pedal /ring/inductive switches can be chosen.

• Complete with an accessory dispensing kit.

Specification:
 

 Standards:         CE approved
Liquid ratio:         1:1-3:1 (can be adjusted)
Tank:                  1gallon (Other capacity can be chosen)
Mixing method:    static mixer
Dispensing time:  0.007S-9.999S
Cycles (interval) time: 0.1S-9.9S
operating Model:  manual,timer.cycles
Repeatability:      0.0005S
Min deposit:         0.01ml
Voltage:              110V/220V 50Hz
Internal Voltage: 24 VDC
Power:               < 15W
Weight:              25kgs. 58.8kgs(Automatic cleaning)
Air Input:           7KgF/cm2 Dry air without lubrication
Air Output:         0.1-7KgF/cm2
Size:                  58.4X311X51.4cm 71X42X27cm(Automatic cleaning)
 

Application:
The dispenser is suitable to dispense 1:1-3:1 A, B two component liquid material precisely. mix evenly and quickly.
Industrial: electric component encapsulate ,motor ,electronic, gift.

Note:
Different product art can fitting different component.
if you dispensing line or micro dot (as like pcb),the machine can together with the xy table to work.
if you dispensing volume is very big ,you can directly using the machine to work.
if your dispensing volume is small, you can connect the needle or pinch tube.
 

Example:

Video1	Video 2

Fitting and consumable: